Chapter 2 Setup
77
2
Connecting to the Network
For Ethernet Interface
Connect the product to a network by a LAN cable via a hub.
Connecting the Ethernet interface cable
Insert a category 5e or higher LAN cable into the Ethernet connector until you hear a click.
The product uses a modular connector specifically designed for the cash drawer. Do not
connect the connector to an ordinary telephone line.
CAUTION
When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
Never attempt to connect the customer display cable, drawer kick-out cable, or a
standard telephone line cable to the Ethernet connector.
To Next Page
Loading...
