VT Rev.1 v
Before Reading This Manual
This section describes what you should know before reading this manual.
Structure of Robot System
The VT series Manipulators can be used with the following combinations of software.
VT6-A901S
OK: Compatible All functions of the EPSON RC+ 7.0 and the robot system are
available.
!!!: Compatible Connection is OK. It is recommended to use the following
versions or later. Display or control may not be operated properly.
Shape of Motors
The shape of the motors used for the Manipulator that you are using may be different from
the shape of the motors described in this manual because of the specifications.
Setting by Using Software
This manual contains setting procedures by using software. They are marked with the
following icon.
EPSON
To Next Page
Loading...
Need help?
General