Epson WF-7840 Series - Network Settings; Wi-Fi Setup; Wi-Fi Direct

PC Connection via USB:
Select Enable to allow a computer to access the printer when connected by USB. When Disable is
selected, printing and scanning that is not sent over a network connection is restricted.
Related Information
& “Loading Paper” on page 32
Network Settings
Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from following and then
follow the instructions on the control panel.
Router:
❏ Wi-Fi Setup Wizard
❏ Push Button Setup(WPS)
❏ Others
❏ PIN Code Setup(WPS)
❏ Wi-Fi Auto Connect
❏ Disable Wi-Fi
You may be able to resolve network problems by disabling the Wi-Fi settings or making
the Wi-Fi settings again. Tap
> Router > Change Settings > Others >
Disable Wi-Fi > Start Setup.
Wi-Fi Direct:
❏ iOS
❏ Android
❏ Other OS Devices
❏ Change
❏ Change Network Name
❏ Change Password
❏ Change Frequency Range
is setting may not be displayed depending on the region.
❏ Disable Wi-Fi Direct
❏ Restore Default Settings
Product Information > Settings Menu List > General Settings
307