Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used,
Wi-Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏ Wired LAN/Wi-Fi Status
❏ Wi-Fi Direct Status
❏ Email Server Status
❏ Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ MS Network Sharing
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 267
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 268
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 269
& “Connecting a Smart Device and Printer Directly (Wi-Fi Direct)” on page 269
& “Printing a Network Connection Report” on page 280
& “Checking the Network Connection Status” on page 278
Web Service Settings
Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
You cannot change settings that have been locked by your administrator.
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
Product Information
>
Settings Menu List
>
General Settings
308
To Next Page
Loading...
