EasyManuals Logo

Epson WF-7840 Series User Manual

Epson WF-7840 Series
437 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #341 background imageLoading...
Page #341 background image
Connecting the Printer to the Network
You can connect the printer to the network in several ways.
Connect by using advanced settings on the control panel.
Connect by using the installer on the website or on the soware disc.
is
section explains the procedure to connect the printer to the network using the printer's control panel.
Before Making Network Connection
To connect to the network, check the connection method and setting information for connection in advance.
Gathering Information on the Connection Setting
Prepare the necessary setting information to connect. Check the following information in advance.
Divisions Items Note
Device connection
method
Ethernet
Wi-Fi
Decide how to connect the printer to the network.
For Wired LAN, connects to the LAN switch.
For Wi-Fi, connects to the network (SSID) of the access point.
LAN connection
information
IP address
Subnet mask
Default gateway
Decide the IP address to assign to the printer.
When you assign the IP address statically, all values are required.
When you assign the IP address dynamically using the DHCP function,
this information is not required because it is set automatically.
Wi-Fi connection
information
SSID
Password
These are the SSID (network name) and the password of the access
point that the printer connects to.
If MAC address ltering has been set, register the MAC address of the
printer in advance to register the printer.
See the following for the supported standards.
“Wi-Fi Specications” on page 330
DNS server information IP address for
primary DNS
IP address for
secondary DNS
These are required when specifying DNS servers. The secondary DNS
is set when the system has a redundant conguration and there is a
secondary DNS server.
If you are in a small organization and do not set the DNS server, set
the IP address of the router.
Proxy server
information
Proxy server name Set this when your network environment uses the proxy server to
access the internet from the intranet, and you use the function that
the printer directly accesses to the internet.
For the following functions, the printer directly connects to the
internet .
Epson Connect Services
Cloud services of other companies
Firmware updating
Administrator Information
>
Connecting the Printer to the Network
>
Before Making Network Connection
341

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WF-7840 Series and is the answer not in the manual?

Epson WF-7840 Series Specifications

General IconGeneral
Print Resolution4800 x 2400 dpi
Max Print Size13" x 19"
Duplex PrintingYes
Scanner TypeFlatbed, ADF
Scan Resolution1200 x 2400 dpi
ConnectivityUSB, Ethernet, Wi-Fi, Wi-Fi Direct
Display4.3" Color Touchscreen
CategoryPrinter
FunctionsPrint, Copy, Scan, Fax
Maximum Paper Size13" x 19"
Input Paper Capacity250 sheets
ADF Capacity50 sheets
Print TechnologyPrecisionCore
Print Speed Black25 ppm
Print Speed Color12 ppm
Paper Capacity250 sheets
Printing TechnologyPrecisionCore
Mobile PrintingApple AirPrint, Mopria Print Service, Epson Connect
Paper SizesA4, A5, Letter, Legal
Paper Capacity Maximum500 sheets
Monthly Duty Cycle50, 000 pages
Product TypeAll-in-One Printer

Related product manuals