Epson WorkForce Pro WF-C579R - Cleaning the Print Head Using the Product Control Panel

343
Related tasks
Removing and Installing Ink Packs
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the home button, if necessary.
4. Select Settings > Maintenance > Print Head Cleaning.
You see a screen like this:
5. Select Start to clean the print head.
When the cleaning cycle is finished, you see a message on the screen.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
6. Select Yes if you want to print a new nozzle check pattern.
7. Select Start to print a nozzle check pattern and confirm that the print head is clean.