65
Connecting to an iOS device using Wi-Fi Direct
You can connect an iPhone or iPad directly to your product without using a wireless router or access
point. To use this feature, your iOS device must have the following installed:
• iOS 11 or later
• Built-in standard Camera app
• Epson iPrint version 7.0 or later
If your iOS device does not support the above software, see the link below instead.
1. Press the home button, if necessary.
2. Press the icon.
You see a screen like this:
3. Select Wi-Fi Direct.
4. Select Start Setup.
5. Select iOS.
To Next Page
Loading...
