The print head position is out of alignment.
Solutions
Select the Maintenance > Print Head Alignment > Vertical Alignment menu on the control panel to
align the print head.
Bidirectional printing is enabled.
Solutions
If the print quality does not improve even aer aligning the print head, select Settings > Printer Settings
on the control panel and then disable Bidirectional.
During bidirectional (or high speed) printing, the print head prints while moving in both directions, and
vertical lines may be misaligned. Disabling this setting may slow down printing speed.
Printout Comes Out as a Blank Sheet
The print head nozzles may be clogged.
Solutions
Try Power Cleaning.
& “Running Power Cleaning” on page 165
The print settings and the paper size loaded in the printer are dierent.
Solutions
Change the print settings according to the paper size loaded in the paper cassette. Load paper in the
paper cassette that matches the print settings.
Multiple sheets of paper are fed into the printer at the same time.
Solutions
See the following to prevent multiple sheets of paper being fed into the printer at the same time.
& “Several Sheets of Paper are Fed at a Time” on page 186
Solving Problems
>
Printing, Copying, and Scanning Quality is Poor
>
Copy Quality is Poor
250
To Next Page
Loading...
