23 / 66
4 • Working with ERBEJET 2
80110-801_V23493
2022-03
Fig. 4-5
2. Use the vacuum hose to connect the ESM 2 to the suction container directly. Plug
the membrane filter onto the ESM 2.
Connecting the applicator to the
pump unit, replacing the applicator
Fig. 4-6
Connect the applicator connector with the pump unit. The applicator connector
must audibly click into place.
A pump unit is used for several patients
Risk of cross-infection.
A pump unit may only be used for one patient.
Non-sterile applicator connector
The patient can be infected by the use of a non-sterile applicator
connector.
Use aseptic techniques when you connect the applicator connec-
tor with the pump unit for the first time or when replacing the
applicator.
To Next Page
Loading...
