Erbe ERBEJET 2 - Deleting a Program, Overwriting a Program

35 / 66
4 • Working with ERBEJET 2
80110-801_V23493  2022-03
1. Change the settings of program 2 EXAMPLE.
2. Press the selection button next to the menu item Program / Setup.
3. Press the selection button next to the menu item SAVE / ERASE program.
4. Press the selection button next to the menu item SAVE.
5. Press the selection button next to the menu item SAVE settings as new program.
Fig. 4-30
6. The window automatically offers you the number 2 b. Press the selection button
next to the menu item NAME / SAVE.
7. Press the selection button next to the SAVE menu item until the message PRO-
GRAM SAVED appears.
8. Press the selection button next to the menu item Return.
In the Settings window you see the program 2 b EXAMPLE.
Call up the window Select program . You will then see in a selection list of programs
that the program 2 EXAMPLE has been renamed as 2 a EXAMPLE.
With the footswitch ReMode switch you can change between the two program levels
a and b of the program 2 EXAMPLE if you have selected the program level 2 a EXAM
-
PLE or 2 b EXAMPLE.
Deleting a program, Overwriting a program
Deleting a program
1. Press the selection button next to the menu item Program / Setup.
2. Press the selection button next to the menu item SAVE / ERASE program.
3. Press the selection button next to the menu item ERASE program.
4. Press the selection button next to the ERASE program menu item until the mes-
sage PROGRAM ERASED appears.
Overwriting a program
1. Press the selection button next to the menu item Program / Setup.
2. Press the selection button next to the menu item SAVE / ERASE program.
3. Press the selection button next to the menu item SAVE.
4. Press the selection button next to the menu item OVERWRITE current program.
5. Press the selection button next to the SAVE menu item until the message PRO-
GRAM SAVED appears.
L1
L2
L3
R1
R2
R3