Front Panel Control
Video Monitor Usage TIme Information Only
Video Monitor Preview Time Duration that the monitor will be active from the time the “on” button is pressed
Audio Monitor Input
Audio Slot Select Selects the slot from which to monitor a channel on the front panel.
Audio Channel Select
Selects the channel from the slot selected in Audio Slot Select and the module set in Audio
Module Select for displaying on the front panel.
Audio Module Select Selects the module from the slot selected in Audio Slot Select.
Menu Display and Keypad
Keypad Lock Time The timeout time in seconds after which the keyboard gets locked.
Keypad LED Brightness The brightness of the keys in the keypad.
Display Test Starts a test sequence on the display to verify correct operation.
USB Control
1
Format USB Stick
Recreates the default directory structure on the USB stick connected to the front panel. Any
existing data on the USB stick will be lost.
1
Visible only when a USB drive is detected.
4.4.2 Advanced Menu
The Advanced menu allows access to all of the Advanced menus for the installed
option cards. Selecting the option card (the parameters of which you wish to edit)
from the Slot <n> option will give access to the required menu.
Note: The availability of some options depends upon the hardware fitted or
licenses available.
If no option card is selected, the System menu is displayed as shown below.
Table 4.12 Advanced Menu
Advanced
Slot <n> See the menu of the installed card:
CE-a, CE-x, CE-xA Pre-Processor Advanced Menu
CE-x, CE-xA Encoder Advanced Menu
CE-a J2K Advanced Menu
CE-HEVC Encoder Advanced Menu
Satellite Modulator Option Card Advanced Menu (AVP 3000)
ASI I/O Option Card Advanced Menu
G.703 Transceiver Card Advanced Menu
GPI Option Card Advanced Menu
System
Network Configuration
Check Duplicate IP Address
Enable, Disable. If enabled, the unit checks whether there is another
To Next Page
Loading...