Installing the Equipment
Table 2.12 Lock LED State Descriptions
Item Description
Off The SDI/HD-SDI Input is not active.
Red The SDI/HD-SDI input is active, but not locked.
Green The SDI/HD-SDI input is active and is locked.
Alternate Red and Green
The SDI/HD-SDI input is active, but video with the wrong line standard is being
received.
2.3.4.4 Analogue Video Input via the CVBS Interface (CE-xA)
Analogue composite video can be input via the 75 Ω
female BNC connector (CVBS) on the rear panel.
Table 2.13 Analogue Video Input via the CVBS Interface
Item Specification
Connector types 75 Ω female BNC
Connector designation CVBS
Pin-outs Centre
Shield
Input
Ground/Chassis
Table 2.14 CVBS LED State Descriptions
Item Description
Off The CVBS input is not active.
Red The CVBS input is active, but not locked.
Green The CVBS input is active and is locked.
Alternate Red and Green The CVBS input is active, but video with the wrong.
2.3.4.5 Digital Audio Input Connector (All CE-a and CE-x Option Modules)
Digital audio may be input via the 15-way D-type
connector labeled AUDIO/DATA. The connector supports
both balanced and unbalanced digital audio signals,
though not at the same time. The connector does not
support simultaneous analogue and digital input. The
digital audio can either be balanced (AES3) or
unbalanced (AES3-id) depending on the audio breakout
cable used.
Table 2.15 Audio Breakout Cables
Marketing Code Part Number Supported Audio Mode
AVP/CAB/BAL S14936 Audio Breakout Cable
Balanced Audio: 4 XLRs in + 1 BNC for Audio
Reference Output
AVP/CAB/UNBAL S14937 Audio Breakout Cable
Unbalanced Audio: 4 BNCs in + 1 BNC out for
Audio Reference Output
To Next Page
Loading...