Introduction
The confidence monitor is a 1.8 inch TFT LCD. The On key on the confidence
monitor turns the monitor on or off. By pressing and holding the On key, operation
related data is shown. The first line displays the total number of hours the monitor
has been operating; the second line displays the software version. The source of the
video to be displayed, the sleep timeout time and the monitor brightness can be set
up through the front panel or the web user interface. For details on how to configure
the settings for the confidence monitor see Chapter 3, Getting Started.
Note: The AVP 1000 (1RU) does not have a VCM fitted so although fitted, the
Confidence Monitor is not relevant for this model unless subsequently
upgraded to AVP 2000 functionality.
1.3.3 Light Bar
The light bar is green when there are no active alarms or warnings and red if there is
a critical alarm. The light bar is yellow if there is an active warning, minor or major
alarm.
1.3.4 USB Connector
The USB connector provides an interface for saving or exporting configurations to,
and loading or importing configuration from an USB stick. Moreover, by applying an
USB-Ethernet adaptor, the Ethernet port of a control computer can be connected to
the USB connector on the Front Panel of the unit.
1.3.5 Rotary Knob
The rotary knob is used for scrolling through and selecting the menu items.
1.3.6 Main Display
Control and status information is displayed on a graphic VFD display.
1.3.7 Keypad
Select and Cancel keys, as well as a numeric keypad is provided for interaction.
To Next Page
Loading...