EasyManua.ls Logo

Ericsson AVP 2000 Series - Ce-Hevc VCM

Ericsson AVP 2000 Series
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web GUI Control
5-114
EN/LZT 790 0023/1 R16A
The following parameters are available in Properties widget on the Service
Configuration page when a PCR Stream is selected in the Outputs widget. The
same parameters can be accessed through the Output/<output name>/Transport
Stream ID: <n>/Service List/<service name>/Component List/Slot <m> Video 1
PCR stream on PID <n> menu on the front panel.
Table 5.91 PCR Stream Configuration Parameters
Parameters Values Description
PID 16 - 8190
The packet identifier assigned to packets carrying the
program clock reference values.
Bit Rate Weighting Fixed
Not relevant for the PCR component. Read only
parameter.
5.5.3.5 CE-HEVC VCM
5.5.3.5.1 Video and VBI Stream Configuration
Video Input and Pre-Processing
The following parameters are available on the Input tab of the Properties widget on
the Service Configuration page when a video component is selected in the
Outputs widget. The same parameters can be accessed through the
Advanced/CE-HEVC/Video/Video1/Input menu on the front panel.
Table 5.92 Video Input and Pre-Processing Parameters
Parameter Values Description
Video Input Lock Yes, No
Shows whether there is a video lock to the format specified
through the parameters below. Read only parameter.
Source SDI
The video will be sourced from the HD-SDI input on the
rear panel.
Color Bars
An internally generated color bars test pattern will be used
as the video source.
Black
An internally generated black test pattern will be used as
the video source.
Moving Object
An internally generated moving object test pattern will be
used as the video source.
Slate
A slate file uploaded by the user will be used as the video
source.
Color Bars with text overlay The Color Bars source overlaid with the Ident Text.
Input Detection
Off, Auto Detect and Report, Auto Detect and
Configure
Controls whether the format of the SDI input shall be
automatically detected or what actions to take if a change
is detected in the Input Video Format.
Detected Video
Standard
Not Detected, HD 720p50, HD 720p59.94, HD
1080i25, HD 1080i29.97, HD 1080p50, HD
1080p59.94, HD 2160p50, HD 2160p59.94,
The detected video standard if Input Detection is set to
other than Off. If the format is not detected or Input
Detection is set to Off, it is set to Not Detected. Read only
parameter.

Table of Contents

Related product manuals