Ericsson AVP 2000 Series - Page 292

Web GUI Control
5-116
EN/LZT 790 0023/1 R16A
Table 5.93 Video Encoding Parameters
Parameter Values Description
Video Profile
Profile Off,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0
8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0
10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0
8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0
10 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2
8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2
10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2
8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2
10 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High
Tier 4:2:0 8 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High
Tier 4:2:0 10 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High
Tier 4:2:2 8 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High
Tier 4:2:2 10 bit,
UHD HEVC Main 10 Profile Level 5.1 High Tier
4:2:0 10 bit,
UHD HEVC Main 10 Profile Level 5.1 High Tier
4:2:2 10 bit
Sets the encoder profile. The profile will also affect the
allowed bit rate range.
Profile for HD input
Profile Off,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0
8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0
10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0
8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0
10 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2
8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2
10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2
8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2
10 bit
The profile to set when an SD input is detected on the SDI
input. Visible only if Input Detection is set to Auto Detect
and Configure. If this option is visible, the Video Profile
cannot be set manually.