EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
130 (200)
7.17.7 Step 6: Check TOIP Profiles
a. Whilst still in the “RTP Pots Profiles Management” screen from the previous
section, select the “POTS ToIP Profile” button at the top of the screen.
b. Select “Read Network”.
c. Check there is only one entry in the table which is the default and it should
have the following settings:-
d. Exit the window and return to the main LCT screen.
To Next Page
Loading...