Ericsson EDA 2530 - 64 X Pots;Voip Unit Extraction;Insertion

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
151 (200)
8.2.6 64 x POTS/VoIP Unit Extraction/Insertion
a. Extract a 64 x POTS/VoIP unit and check that:-
The LCT equipment view displays the extracted unit
Check the following alarms appear on the alarm browser:-
“cpEqtCardActualChangedTrap”
“cpReplaceableUnitMissingTrap”
b. Insert the previously extracted unit and check that:-
The inserted unit is displayed correctly and without alarms
Refresh the Alarm Browser, check the following alarms disappear on the
alarm browser:-
“cpEqtCardActualChangedTrap”
“cpReplaceableUnitMissingTrap”
c. Repeat steps a. and b. for all other 64 x POTS/VoIP units.
d. Exit the Alarm Browser window.