Ericsson EDA 2530 - Adding Interfaces to the Static Vlans

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
79 (200)
7.7 Adding Interfaces to the Static VLANs
a. Whilst still in the “Static VLANs Management” window, select the “Ports”
button at the top left corner. The “Define VLAN user port membership”
screen will be displayed.
b. Select “File” then “Open”, then navigate to the relevant folder and select
the template file “Static VLAN Management – Ports fixed.nsvm”. Select
“Open”, then the “Static VLAN Members” table will be filled in.
The following screen shows that this template file creates a “Parent” EDA
2530 with a single ADSL card configured in slot 2. It also creates the
necessary S-VLAN entries for Child#1 (EDA 2510 or EDA2530) which is
subtended from GigE Port 2.