EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
76 (200)
Folder Name File Type/s File Quantity
SHDSL Profiles .lcp & .psp 2 for all sites. (Standard)
Static VLAN & VLAN Port Config .nsvm & .vlm 2 for all sites. (Standard)
Downstream Flows .dfc 4 files – 1 for slots 18, 19, 20, 21 for all sites
PVC Config Parent - shdsl .e42 4 files – 1 for slots 18, 19, 20, 21 for all sites
PVC Config Child#1 - shdsl .e42 4 files – 1 for slots 18, 19, 20, 21 for all sites
PVC Config Child#2 - shdsl .e42 4 files – 1 for slots 18, 19, 20, 21 for all sites
PVC Config Child#3 - shdsl .e42 4 files – 1 for slots 18, 19, 20, 21 for all sites
File Name File Type File Quantity
SHDSL Line Profiles .lcp 1 for all sites. (Standard)
SHDSL Stack Profiles .psp 1 for all sites. (Standard)
Static VLAN Management – Ports fixed .nsvm 1 for all sites. (Standard)
Static VLAN Management – Static VLANS fixed .vlm 1 for all sites. (Standard)
xDSL Bridge Management – Downstream Flows –
Slot x
.dfc 4 files – 1 for slots 18, 19, 20,
21 for all sites
xDSL Bridge Management – PVC Management –
Slot x
.e42 4 files – 1 for slots 18, 19, 20,
21 for all sites
7.6 Configure Static VLANs
a. From the LCT main screen select the path Configuration > IP/Ethernet
Management > IP-CP Static VLAN. The following screen will be
displayed:-
b. Select the “Static VLANs” button, at the top left corner.
c. Select “File” then “Open”, then navigate to the relevant folder and select
the template file “Static VLAN Management – Static VLANS fixed.vlm”.
Select “Open” then the Bridge VLANs table will be filled in.
To Next Page
Loading...