Ericsson EDA 2530 - Create S-Vlans for Additional ADSL Cards (if Required)

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
81 (200)
7.7.1 Create S-VLANs for Additional ADSL Cards (If required)
The template file creates the VLAN data for the ADSL slot 2 card only, additional S-
VLANs must be created for other ADSL cards in the “DATA_INBAND” name,
perform the following:-
a. Double left-click on the “intLag//1/2” entry in “User Port Interface Name”
column.
b. In the “VLAN Egress Ports – entry 2” window select “Read NE”.