Ericsson EDA 2530 - Set Equipment Time and Date

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
152 (200)
8.3 Set Equipment Time and Date
a. From the LCT main screen select the path: “Configuration” > “Equipment
Date/Time”. The “Equipment Date And Time” screen is displayed:-
b. In the “Equipment Date And Time” area, set the current date in the “Date
(mm/dd/yyyy)” field using the calendar function.
c. Type in the current time in the “Time” field.
d. Leave the other fields unchanged at their default settings.
e. Now select the “Apply” button to save the changes.
f. Select “Close” to return to the main LCT screen.
End of section