Ericsson EDA 2530 - Step 4: Configure ITAM for Double Play

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
124 (200)
7.17.5 Step 4: Configure ITAM For Double Play
a. From the LCT main screen select the path;-
Configuration > Connection Modules
b. On the “Connection Modules configuration” screen wait for the information
to be read into the table.
c. Highlight the 1
st
Connection Module for the combined ADSL/POTS slot to
be configured.
d. Click on the View/Modify Selected Connection Module button.
e. Set the Connection Module Type to cm-adslpotsx64-TAM-PPB for
Connection Module type 02HAT00282AAQ, if not already set.