EasyManua.ls Logo

Ericsson EDA 2530 - Page 154

Ericsson EDA 2530
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
154 (200)
Check the Address: shows Slot (as selected), Card Type: ADSLx64, Line:
(as selected).
e. Check the Configuration Profile is set to ADSL2plus_SLOW_BASIC.
Check that only the following three Transmission Mode Type boxes are
ticked:-
ADSL 2+ (G.992.5 over POTS)
ADSL 2 (G.992.3 over POTS)
ADSL (G.992.1 over POTS)
Note: If the Configuration Profile is not set to ADSL2plus_SLOW_BASIC,
or if other Transmission Mode Type boxes are selected instead of the three
types above, then the ADSL lines will need to be reconfigured as described
later. Make a note of the Slot and Line number of any incorrectly configured
lines.
f. Click on the next ADSL Line to be checked.

Table of Contents