EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
156 (200)
e. Check the result is Found (Configured); 64 Updated: 64 Failed: 00.
If there are any failures click on the View Error Log button and read the
display. Any enabled lines will have to be disabled manually.
9.1.2.2 Configure ADSL Lines
a. Place the cursor on the <64 x ADSL unit > to be configured.
b. Right click on the unit and select Lines from the menu.
c. When the ADSL x 64 Lines window appears click on the first ADSL Line to
be configured then left click on the Configure button.
d. Click on the Status tab.
e. Check the Disable button is greyed out. This indicates that the line is
disabled.
f. Click on the Configuration tab.
To Next Page
Loading...