EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
164 (200)
e. Check the result is Found (Configured); 32 Updated: 32 Failed: 00.
If there are any failures click on the View Error Log button and read the
display. Any enabled lines will have to be disabled manually.
9.2.1.2 Configure SHDSL Lines
a. Place the cursor on the <32 x SHDSL unit > to be configured.
b. Right click on the unit and select Lines from the menu.
c. When the SHDSL x 32 Lines window appears click on SHDSL Line1, then
left click on the Configure button.
d. Click on the Status tab.
To Next Page
Loading...