Ericsson EDA 2530 - Page 59

EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
59 (200)
i. Right click and hold over the 64x POTS/VoIP card to be checked. Select
HW/SW Inventory from the menu.
j. In the window displayed, check that the Running Bank (Yes) contains the
correct software release. This is just an example screen.
k. Click on Close to close the Inventory window.
l. Check the “H/W and S/W Inventory” for all new 64x POTS/VoIP cards and
confirm that they have the correct H/W and S/W release.
m. Right click and hold over the new 32 x SHDSL cards to be checked. Select
HW/SW Inventory from the menu.
n. In the window displayed, check that the Running Bank (Yes) contains the
correct software release. This is just an example screen.
o. Click on Close to close the Inventory window.