EasyManua.ls Logo

Ericsson EDA 2530 - Page 64

Ericsson EDA 2530
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
64 (200)
Note the ‘Yellow’ LED is extinguished on the card/s when downloaded
successfully.
n. Click on the Close button if you do not want to switch the software bank.
o. If the download is successful, follow step (o) to perform the Bank Switch.
Otherwise go to step (q) or (r) as appropriate for the download result.
p. “Download successful”
After a successful software download, press the “Switch Software Bank”
button to start the software bank switch, then “Yes” to confirm.
A message will offer the last possibility to abort the operation.
At the end of the switch process, the Switching label changes to Switch
successful.
Then click on the Close button.
Note the ‘Yellow’ LED is lit on the card/s when switched successfully.

Table of Contents