EDA 2530 Commissioning Procedure for Cable and Wireless Access
1/153 22-FGC 101 0239/2 Uen Rev J 2010-04-01
© Ericsson AB 2010
Commercial in confidence
66 (200)
Note: If the new software downloaded in the equipment uses a
different type of database version than the existing one, a forced
switch MUST NOT
be performed from the LCT. If it is selected, the
configuration database will be corrupted and the CP card won’t
reboot.
If the result following download to the CP card is “Incompatible database”
then do not proceed any further commissioning the element, return the CP
card to the Product Support Centre and get a replacement CP unit loaded
with the correct software release.
t. Close all windows to return to the main LCT screen.
End of section
To Next Page
Loading...