Installing the MINI-LINK 6351
Ø 44 mm (1 3/4")
8748
3. Split the wall gland A into two halves and remove layers B from the halves
until you reach a gap of 0—1mm between the layers held against the cable.
A
B
8739
4. Lubricate both the inside and the outside of the wall gland, using the
lubricant enclosed in the delivery.
Note: Ensure that there is enough cable to reach the injector before fitting
the wall gland.
8740
L
u
b
r
i
c
a
n
t
3913/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
