Installing a MINI-LINK 6351
5. Insert the bottom half of the wall gland into the bottom of the hole and put
the cable in it.
6. Put the upper part of the wall gland on top of the cable and insert it into
the wall.
8729
7. Tighten the four screws crosswise. Recommended maximum torque is 4
Nm (appropriate torque depends on several things, for example, cable
size and material, amount of used lubricant, hole size, or material in the
cable sheath).
8741
4 mm
40 13/1531-HRA 901 17/9 Uen B | 2016-03-04
To Next Page
Loading...
