Page 4 of 43 ST-SM8l
SES 2000 AUTOCLAVE
TECHNICAL DATA
(Standard Version)
Electrical Data
Supply 220/230/240V a.c. at 50/60Hz
110V a.c. at 50/60Hz
Nominal Loading @ 230V - 2kW (8.7A)
@ 110V - 1.4kW (12.7A)
Fuses Chassis
230/240V 10A, Part No.380003, (x2)
400mA, Part No.696181, (x1)
220V 13A, Part No.380002, (x2)
400mA, Part No.696181, (x1)
110V 16A, Part No.111940, (x2)
800mA, Part No.380004, (x1)
Relay board
T2A, 250V (x1)
Safety standards
IEC 1010-1:1990
IEC 601-1:1977
BS5724:Part 1:1979
ESCHLE (Second Edition 1986)
IEC 601-1-2 (1993)
Sterilizing Data
Sterilizing time
At 134/137°C 3 mins 20 sec.
At 121/124°C 15 mins
Typical overall cycle 134°C : 13 minutes
time (D indicates 134°C : 30 minutes (D)
drying included) 121°C : 24 minutes
121°C : 41 minutes (D)
Note: Overall cycle times may vary depending
on machine and loading conditions.
Nominal Operating pressures:
134°C cycle - 3.14 bar abs
121°C cycle - 2.11 bar abs
Water reservoir
capacity 2.0 litres
Dimensions
Autoclave Width 460mm
Length 461mm
Height 360mm
Chamber Diameter 200mm
Length 348mm (max)
Capacity 10.6 litres
Trays Width 183mm
Length 282.6mm
Height l7mm
Tray Loading 1.5 kg per tray
Weight (approx.)
Net 27.5kg
Shipping 32.0kg
Symbols
For use with alternating current
Caution Hot Surface
Caution refer to accompanying
documents
Sterilising cycle without drying phase
(NB. temperature = cycle temperature)
Sterilising cycle with drying phase
(NB. temperature = cycle temperature)
To Next Page
Loading...
