Escient FireBall E-120 - Connecting an Escient Touch Screen

PAGE 44
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
CHAPTER 2 - SETTING UP FIREBALL
Connecting an Escient Touch Screen
Three RS-232 serial ports are available on FireBall. You can use one of these ports to
control FireBall from the optional Escient ETP-1000 Touch Screen.
Other touch screen systems may be compatible. Please contact your dealer for more
information.
The RS-232 cable needed to connect FireBall to the Escient ETP-1000 touch screen is
included with the touch screen.
u Connect one end of this cable to the FireBall RS-232 communication Port.
v Connect the other end of this cable to the RS-232 communication port on the
ETP-1000 touch panel.
2
Please consult your Dealer or the
Escient website if you wish to use
a touch screen not specied in this
manual.