PAGE 45
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
CHAPTER 2 - SETTING UP FIREBALL
Connecting the Power Cord
u Use the Power Cord.
v Connect one end of power cord to the FireBall AC Port (plug).
w Connect the other end of the power cord to a 120V electrical outlet.
Caution: To prevent electric
shock, do not use a 3 wire to 2
wire adapter plug. A 3 prong
outlet is required.
2
It is recommended to connect
the power cord to a UPS, surge
supressor, or directly to a wall
outlet. NEVER CONNECT THE
POWER CORD TO A SWITCHED
OUTLET.
To Next Page
Loading...
