PAGE 71
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
CHAPTER 3 - GETTING STARTED
Inserting and Removing Discs
After the initial Autobuild, what happens when you insert and remove discs from your
changer? If FireBall detects that a changer door has been closed, the Quick Lookup
screen is shown, and FireBall will begin to check each previously empty slot in the
changer to see if any new discs were added. It also checks each previously occupied slot
in the changer to see if any discs were removed.
Do not remove and insert discs in the same slot in the same step because Autobuild
will not know that this slot changed.
Do not remove and insert discs in the
same slot in the same step.
2
Escient Pipeline software allows you to
add scanned or downloaded covers not
recognized by FireBall.
To Next Page
Loading...
