PAGE 73
FIREBALL INSTALLATION & USER’S GUIDE - M22001-01A1
CHAPTER 3 - GETTING STARTED
WARNING!
Selecting “Disconnect” will permanently remove all CDs in that changer from your
Music Guide. In order to re-connect the changer and show the CDs in the Music Guide,
you must perform a full Autobuild on the changer if it is reconnected at a later time.
2
Power the changer On.
Insert discs. If discs are already
inserted, simply open and close the
changer door.
This will start the Autobuild
process which is the downloading
of information regarding your CD
collection.
To Next Page
Loading...
