7-2-4 S/N Input
Set the serial No. by selecting this menu.
The set serial No. is printed out when printing
out Adjust data.
7-2-5 System Item
Change the setting of the chart by selecting this
menu.
1) Chart
Select the type of the chart or change the setting of
the channel. At the time of setting, match it with
the one of the chart.
: Set the channel of chart
2) Motor Speed
Do not change the setting value because it is fixed.
3) Model Select
Switch the autoref or lensmeter which communicates
with APH550.
・REF
A: Communication with the autoref made by
Essilor (ARK070, AKR550, AKR750)
and SHIN-NIPPON.
B: Communication with the autoref made
by CANON (RK-F1, R-F10)
・LM
A: Communication with the new model lensmeter
(ALM500, ALM700).
B: Communication with the old model lensmeter
(CLE60, CLE070)