19
Installing the decoder Installing the decoder
pen assignment colour
6 Rear light yellow
5 Front light White
4 Left track connection black
3 Right track connection red
2 Left motor terminal Gray
1 Motor connection right orange
Figure 2: 5 & LokSound LokSound micro 5 with 6-pin interface NEM651
58416 LokSound 5
front
Speaker # 1 Speaker
# 2 -Motoranschluss right
-Gleisanschluss right -
Rear light -U +
(positive pole) -
AUX1 (Power)
light Front
-Gleisanschluss left
-Motoranschluss left -
back
-- AUX8 (Power)
-- AUX7 (Power)
-- AUX6 (Power)
-- AUX5 (Power)
-- AUX4 (Power)
-- AUX 3 (Power)
-- VCC
-- AUX10 / wheel sensor
-- GND
-- AUX9 / PwrPackCtrl
-- U + (+ pole)
AUX9, AUX10 are logic level outputs and inputs
58816 LokSound micro 5
AUX7 is logic level output (Default: PwrPackCtrl)
Motor connection right -----------
---- right track connection
---- AUX1 (Power)
---- U + (+ pole)
---- AUX2 (Power)
---- left track connection
1
6
Light Front -----------
Light rear
speakers # 1
Speaker # 2 left motor
terminal
-- GND
-- U +
AUX9 Default: PwrPackCtrl
GND
-AUX7 -U
+ (+ Pol) -
-- VCC
-- AUX5 (Pwr)
-- AUX6 (Pwr)
-- AUX2
(Power)