Etatron eOne PLUS - Plus Proportional and Metering Pump

ENGLISH
61
PLUS PROPORTIONAL AND METERING PUMP
The metering pump can operate in either Proportional or control mode pH, Rx or PPM meter. At the first power on
you can choose the operating configuration of the equipment.
With reference to the following table, the operator can select the mode that best suits his metering needs: only some
of the many programming menus will be made available, so you get a simplification and speeding up of the device
commissioning.
Operating functions:
Configuration Type
MANUAL
1 x N
1 x N (m)
1 / N
mL / imp.
L / imp.
mL / m
3
PPM
mA
Timer
PH Instrument RX Instrument
CL (PPM) Instrument
VFT
FW01
   
VFT-S
FW02
     
MF
FW03
        
ST
FW04
   
VFT-T
FW05
    
VFT-S-T
FW06
      
MF-T
FW07
         
ST-T
FW08
    
Once the configuration is set, scrolling the menu with the LEFT () and RIGHT () arrow keys, confirm the choice
with the START / STOP button. For an eventual reconfiguration it is necessary to do a TOTAL RESET.