PROGRAMMABLE TIMER FUNCTION DAILY AND WEEKLY
The TIMER settings menu is present in the configurations VFT-T VFT-ST, MF-T and ST-T. The Timer menu
function allows you to manage the operating status of the metering pump over all the set functions. The timer is
structured in such a way that you can have 16 start cycles in a day (Pump On) and Stop (Pump not operating). It is also
possible to manage 16 cycles of start and stop for each day of the week. The following selections can be made:
DISABLE TIMER The timer is deactivated.
DAILY TIMER By enabling this selection, the user can choose 16 cycles of start and stop throughout the day.
WEEKLY TIMER By enabling this selection, the user can choose 16 cycles of start and stop, over every single day
of the week: Monday, Tuesday, etc.
Flow diagram TIMER function
To Next Page
Loading...
