ETOP PISA-E11 - Umpers on the Pisa-E11

PISA-E11 User`s Manual 8
2.1 Jumpers on the PISA-E11
The jumpers on the PISA-E11 allow you to configure your Single
Board Computer card according to the needs of your applications.
If you have doubts about the best jumper configuration for your
needs, contact your dealer or sales representative.
The following table lists the jumpers on PISA-E11 and their respective
functions.
Jumper Locations on the PISA-E11 .................................................. 9
JP1: Clear CMOS RAM Data .......................................................... 10
JP2: CF Card Mode Selection ......................................................... 10
COM2MODE: RS232/RS422/RS485 ............................................... 11
ATMODE: AT Mode Selection ........................................................ 12
LCDPWR: LCD PANEL Power Selection .......................................... 12