PISA-E11 User`s Manual 45
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be
selected.
The choice: Enabled, Disabled (default).
If Typematic Rate Setting is Enabled,You can choice Rate and Delay:
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you
hold the key down.
The choice: 6 (default), 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke.
The choice: 250 (default), 500, 750, and 1000.
Typematic Rate (Chars/Sec)
6 ….. [ s ]
8 ….. [ ]
10 ….. [ ]
12 ….. [ ]
15 ….. [ ]
20 ….. [ ]
24 ….. [ ]
30 ….. [ ]
: Move Enter: Accept ESC: Abort
Typematic Delay (Msec)
250 ….. [ s ]
500 ….. [ ]
750 ….. [ ]
1000 ….. [ ]
: Move Enter: Accept ESC: Abort
To Next Page
Loading...