PISA-E11 User`s Manual 59
On board Device
Phoenix-Award BIOS CMOS Setup Utility
Onboard Device
↑↓← → ：Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit F1:General Help
F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
USB Controller
Select enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals.
The choice: Enabled (default), Disabled.
USB 2.0 Controller
This entry is for disable/enable USB2.0 controller only. The BIOS itself
may/may not have high speed USB support. If the BIOS has high
speed USB support built in, the support will be automatically turn on
when high speed device were attached.
The choice: Enabled (default), Disabled.
USB Keyboard Support
Select enabled if user plan to use an USB keyboard.
The choice: Enabled, Disabled (default).
Azalia/AC97 Audio Select
The choice: Auto (default), Azalia, AC97 Audio and Modem, AC97
Audio only, AC97 Modem only, ALL Disabled.
To Next Page
Loading...