ETOP PISA-E11 - Advanced Bios Features

40 PISA-E11 User`s Manual
3.3 Advanced BIOS Features
This section allows you to configure your system for basic operation.
You have the opportunity to select the system’s default speed,
boot-up sequence, keyboard operation, shadowing and security.
Phoenix-Award BIOS CMOS Setup Utility
Advanced BIOS Features
►CPU Features
[Press Enter]
►Hard Disk Boot Priority
[Press Enter]
Virus Warning
[Disabled]
CPU L1 & L2 Cache
[Enabled]
CPU L3 Cache
[Enabled]
Quick Power On Self Test
[Enabled]
First Boot Device
[Hard Disk]
Second Boot Device
[CDROM]
Third Boot Device
[LS120]
Boot Other Device
[Enabled]
Swap Floppy Drive
[Disabled]
Boot Up Floppy Seek
[Enabled]
Boot UP Num Lock Status
[Off]
Gate A20 Option
[Fast]
Typematic Rate Setting
[Disabled]
x Typematic Rate (Chars/Sec)
6
x Typematic Delay (Msec)
250
Security Option
[Setup]
APIC Mode
Enabled
MPS Version Control For OS
[1.4]
OS Select For DRAM > 64MB
[Non-OS2]
Report No FDD For WIN 95
[No]
Item Help
Menu Level ►
↑↓← → ：Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit
F1:General Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
(Figure 4)