ETOP PISA-E11 - Drive A;B; Video; Halt on

PISA-E11 User`s Manual 39
Drive A/B
These fields identify the types of floppy disk drive A or drive B that
has been installed in the computer. The available specifications are:
None(default)
360K
5.25 in.
1.2M
5.25 in.
720K
3.5 in.
1.44M
3.5 in.
2.88M
3.5 in.
Video
This field selects the type of video display card installed in your
system. You can choose the following video display cards:
EGA/VGA
For EGA, VGA, SEGA, SVGA or PGA monitor
adapters. (default)
CGA 40
Power up in 40 column mode.
CGA 80
Power up in 80 column mode.
MONO
For Hercules or MDA adapters.
Halt On
This field determines whether the system will halt if an error is
detected during power up.
All errors
Whenever the BIOS detects a non-fatal error,
the system will stop and you will be prompted.
No errors
The system boot will not be halted for any error
that may be detected.
All, But Keyboard
The system boot will not be halted for a
keyboard error; it will stop for all other errors
All, But Diskette
The system boot will not be halted for a disk
error; it will stop for all other errors.
All, But Disk/Key
The system boot will not be halted for a key-
board or disk error; it will stop for all others.
(default)