ETOP PISA-E11 - First;Second;Third Boot Device; Boot Other Device; Swap Floppy Drive; Boot up Floppy Seek

44 PISA-E11 User`s Manual
First/Second/Third Boot Device
The BIOS attempts to load the operating system from the devices in
the sequence selected in these items.
The Choice: Floppy, LS120, Hard-Disk, ZIP100, CDROM, Disabled,
USB-FDD, USB-ZIP, USB-CDROM, Legacy LAN.
Item
Default
First Boot Device
Hard-Disk
Second Boot Device
CDROM
Third Boot Device
LS120
Boot Other Device
When enabled, BIOS will try to load the operating system from other
device when it failed to load from the three devices above.
The choice: Enabled (default), Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign
physical drive B to logical drive A and vice-versa.
The choice: Enabled, Disabled (default).
Boot Up Floppy Seek
Selection of the command “Disabled” will speed the boot up.
Selection of “Enabled” Searches disk drives during boot up.
The choice: Enabled (default), Disabled.
Boot Up Num Lock Status
Selects power on state for Num Lock.
The choice: On, Off (default).
Gate A20 Option
The choice:
Normal
A pin in the keyboard controller controls GateA20.
Fast
Lets chipset control GateA20 (default).