ETOP PISA-E11 - CPU Feature; Delay Prior to Thermal; Limit CPUID Maxval; C1 E Function

PISA-E11 User`s Manual 41
CPU Feature
Phoenix-Award BIOS CMOS Setup Utility
CPU Feature
Delay Prior to Thermal
[16 Min]
Limit CPUID MaxVal
[Disabled]
C1E Function
[Auto]
Execute Disabled Bit
[Enabled]
Item Help
Menu Level ►
↑↓← → ：Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit
F1:General Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
(Figure 5)
Delay Prior to Thermal
Delay Prior To Thermal is set at 16 minutes as default, which means
the board will wait 16 minutes before it activates the processor's
integrated thermal control circuit.
The choice: 4 Min , 8 Min, 16 Min (default), 32 Min.
Limit CPUID Max Val
The choice: Enabled, Disabled (default).
C1E Function
The choice: Auto (default), Disabled.
Execute Disabled Bit
The choice: Enabled (default), Disabled.