ETOP PISA-E11 - Page 82

74 PISA-E11 User`s Manual
3.8 PC Health Status
This section helps you to get more information about your system
including CPU temperature, FAN speed and voltages. It is
recommended that you contact with your motherboard supplier to
get proper value about your setting of the CPU temperature.
Phoenix-Award BIOS CMOS Setup Utility
PC Health Status
CPU Warning Temperature
[Disabled]
Current System Temp.
40C / 107F
Current CPU Temperature:
40C / 100F
CPU FAN Speed
0 RPM
CHASSIS Fan Speed
7670 RPM
Vcore
1.20V
+1.5V
1.52V
+3.3V
3.47V
+5V
5.16V
+12V
12.22V
-12V
-12.44V
VBAT(V)
3.32V
5VSB(V)
5.04V
Shutdown Temperature
[Disabled]
Item Help
Menu Level ►
↑↓← → ：Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit
F1:General Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
CPU Warning Temperature
Select the CPU over-heated warning temperature.
The choice: Disabled (default), 50C/122F, 53C/127F, 56C/133F,
60C/140F, 63C/145F, 66C/151F, and 70C/158F.
Current System Temp
Show System Temperature.
Current CPU Temperature
Shows Board Temperature
CPU FAN Speed
Shows CPU FAN speed.