EUCHNER CTS-C1-BP-FLX - Page 6

Operating Instructions
Transponder-Coded Safety Switch CTS-C1-BP/BR-FLX
6
(translation of the original operating instructions) MAN20001587-01-02/23
Before the device is used, a risk assessment must be performed on the machine, e.g. in accordance with the following
standards:
Ì ENISO13849-1
Ì ENISO12100
Ì IEC62061
Correct use includes observing the relevant requirements for installation and operation, particularly based on the following
standards:
Ì ENISO13849-1
Ì ENISO14119
Ì EN60204-1
The safety switch is allowed to be operated only in conjunction with the intended EUCHNER actuators and the related con-
nection components from EUCHNER. On the use of different actuators or other connection components, EUCHNER provides
no warranty for safe function.
Safety switches in the version CTS-…-BR can be integrated into a BR device chain. Connection of several devices in a BR
switch chain is permitted only using devices intended for series connection in a BR switch chain. Check this in the speci-
cations of the device in question.
Important!
Ì The user is responsible for the proper integration of the device into a safe overall system. For this
purpose, the overall system must be validated, e.g. in accordance with ENISO13849-2.
Ì It is only allowed to use components that are permissible according to Table 1: System components.