Euphonix MC Control User Manual

AUDIO | VIDEO MEDIA CONTROLLER
USER GUIDEEuControl
47
Chapter 6: EuControl
EuControl is launched automatically upon starting your Mac and runs in the
background. EuControl is responsible for finding, linking, and communicating
with all MC Controls and MC Mixes on the network. EuControl’s configuration
tasks are accessed by clicking the green icon on the Mac taskbar and selecting
EuControl Settings.
Only one instance of EuControl can run on a workstation. However, multiple work-
stations on a single network can each run EuControl. Each instance of EuControl
can connect an MC Transport, an MC Control, and up to four MC Mixes on the
network. These multiple devices act together as a single control surface. Once
connected, these Artist media controllers are not available to other instances of
EuControl until relinquished.
Figure 6-1 Selecting EuControl Settings from the taskbar
The tabs are discussed in the order (left to right) they appear at the top of the
EuControl Settings dialog.

Euphonix MC Control Specifications

General

Brand	Euphonix
Model	MC Control
Category	Recording Equipment
Language	English