AUDIO | VIDEO MEDIA CONTROLLER
USER GUIDEEuControl
54
6.3.5 Auto-bank to selected track
Selecting a track in the application causes the MC Control to display the bank
containing that track. This keeps the selected track assigned to the surface.
6.3.6 Display track numbers on surface
The track number is included with the track name in the channel display.
6.3.7 Solo Mode
Not all applications support Solo mode. Those that support it behave as follows.
Solo in place
Mutes all tracks except solo track.
After-Fader Listen (AFL)
The Solo level is derived after fader level.
Pre-Fader Listen (PFL)
The Solo level is derived before fader level.
6.3.8 Wheel Sensitivity
The sensitivity of the Jog Wheel can be precisely adjusted using the sliders shown
in Figure 6-4. The top two sliders pertain to the MC Transport, the bottom is the
Jog Wheel for the MC Control.
The center position is the default for each control. Click and drag a slider to
move it right for faster response or left for a slower, more controlled movement.
Click the Reset button to restore the center position.
To Next Page
Loading...
Need help?
General
